Leaves and other debris clogging gutters can damage the woodwork in your home. During the winter, trapped water freezes and expands inside gutters, possibly ruining them. You should clean your gutters at least once a year unless you have hanging trees, in which case you will need to clean them twice a year. If you’re using a ladder, make sure it’s stable and then methodically clean the gutters by hand.
Gutters and downspouts are designed to direct rainwater out of your roof and away from your home. This prevents flooding within the basement and helps protect your windows, doors, walls, and foundation.
Gutters should be checked and maintained regularly as leaves and splinters can clog them. If they become clogged, they will overflow causing damage to your wood and metal. Water can even enter your house through the walls if the gutters are not installed properly.
Also, be careful with mosquitoes. If there is a pool of water in your gutter it can become a breeding ground for them.
When you are scrubbing the gutter, make sure you have the correct cleaning equipment. Make a checklist so you don’t forget.
How To Clean Gutters That Are Too High
Things You Will Need:
- Clothing: Even in hot weather, you should wear a long-sleeved shirt while
cleaning. This will provide additional protection against insects and the
sharp edges of your gutters.
- Gloves: Wear work clothes and rubber gloves. Cleaning the gutters can be a messy
job. Also, the gutters can be quite sharp. For these reasons, you should wear
work clothes (don’t mind staining) and sturdy rubber gloves.
- Protective Eye Wear: If you are cleaning them on a dry day (especially in dusty areas), you
should use a protective mask to prevent dust and pollen from entering
Follow these steps when cleaning gutters that are really high:
- Set up the ladder. You should place the ladder right where you plan to start cleaning. If possible, you should lean it against the wall of your house. Otherwise, you can support it on the gutter that is attached to the house using something to hold the ladder (for example, a nail).
- Before using the ladder, you should test it for stability by climbing a rung or two very carefully. If the ladder tilts or wobbles, you should readjust it until it is firm.
- If the ground is soft, the ladder can sag dangerously. You should place pieces of wood the same size under the foot of the ladder to prevent it from sinking. Then test the ladder one more time to verify its stability. You can rearrange the ladder as needed.
- The uneven or sloping ground can cause the ladder to tilt. You should level the ladder by placing pieces of wood under the sloping side.
- Test the ladder and make any necessary adjustments for greater stability. Tie a bucket to the ladder to deposit the debris. Straighten a wire hanger, but leave the hook as is. You should form a straight piece of metal that ends with a hook at the end.
- Fold the end opposite the hook around the bucket handle and hang it on the second rung from the top.
- Most of the waste in the gutters is biodegradable. If you want, you can
throw them on the ground to decompose or compost them.
- If it’s more practical, you can place a large trash can, tarp, or wheelbarrow next to the ladder. Then, throw the waste into these deposits.
- If you have no other option, you can use a plastic bag as a substitute, but it can be difficult and dangerous to handle, especially if the wind is blowing.
- Remove debris from gutters with a ladder.
How To Clean Gutters With a Pressure Washer
Step by step for cleaning gutters with a pressure washer:
- Connect the garden hose to a the pressure washing machine for a source of water.
- Turn on the faucet to start the flow of water and then begin turn on the pressure washer.
- For safer cleaning, you should have a friend or family member hold the ladder while you work to provide additional stability.
- Once you position the ladder with your pressure washer start to remove debris. When a section
is clear of debris, you must get off the ladder and move it so that you can
reach the next section of the gutter.
- Next, you need to remove the debris as already described. Continue changing positions and cleaning until the gutters are completely clear.
- if water is now flowing through the down spout of the gutter, it may be safe to suspect that there is an obstruction inside the downspout, you should place the ladder on its side and tap it gently with a screwdriver. from top to bottom. A thumping noise is usually an indication of an obstruction.
- The downspouts can also be disconnected from the house and gutter. Set the downspout on the ground and clear any clogs using a long pole, a leaf blower, or a pressure washer.
How To Clean Gutters With a Leaf Blower
Another great cleaning option for your gutters is a powerful leaf blower with a rigid extension attachment.
Following these steps with help you to use a leaf blower to clean your gutters:
- Place the leaf blower where you plan to start cleaning the gutters.
- Insert the longest hose into the leaf blower and secure the longest rigid extension to the hose.
- The leaf blower power cord may not be long enough to fit into an outlet. If this is the case, you must use an extension cord to supply the power to the blower.
- After power is fully connected, you will likely hold the leaf blower at approximately chest height. Measuring the gutter from the top to the floor and start the blowing process.
- For the best results you should be using a leaf blower that has a strong motor. Blowers with weak flow will not be as effective.
- Once the blowing process is complete your gutters should now be clean and clear of any debris.
How to clean gutters and downspouts
- Sturdy ladder – Do not lean the ladder against the gutter and downspout as you could break or bend it.
- Wear non-slip shoes or boots, work gloves, safety glasses, and a dust mask – this is often to protect yourself from accidents.
- Have a shovel or shovel handy – these are often used to pick up leaves and dirt.
- Large trash bags – you will tie trash bags on the stairs. This is where you’ll often put debris.
- Hose with shaft connection – make sure you have enough water pressure.
- Bring a gutter sealant – this is often used to repair cracks in gutters.
- Auger – You will use this if your downspout is clogged.
Now you only have your material.
Try these step by step cleaning instructions for cleaning the gutters and downspouts:
- First, start clearing the world near the downspout. Then, remove any leaves and debris using a narrow trowel. Put dirt in the trash bag. If there is any solid or layered dirt, moisten it before spooning. When the trash bag is full, tie it tightly and then drop it down.
- Second, after removing all the leaves and dirt, clean the gutters with a water pipe. Spray the gutter until no dirt is visible. This is often the simplest time to test if the downspout is clogged. If so, downspout the hose to clean stuck dirt. If that doesn’t work, use a hand tool to loosen and remove debris.
- Third, when watering the gutter, check for any cracks as water can leak into it. Use a sealant to fix it. Also, check for loose screws or see if the gutters hang properly. If not, fix it immediately.
Keep in mind, cleaning the gutters can be challenging and dangerous.If you don’t have time to properly or safely clean the gutter yourself, you can contact a cleaning company that will complete the process for you. Also YouTube provides excellent guides for completing this task.